Skip to main content

Fly Fisherman Throwback: Streamer Strategies

How to fly fish the bottom with the right streamers.

Fly Fisherman Throwback: Streamer Strategies

The author releases a char taken on a sculpin pattern fished with one of his streamer techniques. (Ralph Cutter photo)

Editor's note: Flyfisherman.com will periodically be posting articles written and published before the Internet, from the Fly Fisherman magazine print archives. The wit and wisdom from legendary fly-fishing writers like Ernest Schwiebert, Gary LaFontaine, Lefty Kreh, Robert Traver, Al Caucci & Bob Nastasi, Vince Marinaro, Doug Swisher & Carl Richards, Nick Lyons, and many more deserve a second life. These articles are reprinted here exactly as published in their day and may contain information, philosophies, or language that reveals a different time and age. This should be used for historical purposes only.

This article originally appeared in the February 1992 issue of Fly Fisherman magazine. Click here for a PDF of the print version of "Streamer Strategies."


Over the years of guiding and teaching I've browsed through hundreds of fly boxes, and virtually all contained at least one streamer with its telltale slip of leader dangling from the hook eye. When asked, the owner of the box would usually admit that he used the streamer once or twice then put it into retirement because it "didn't work."

In truth, that streamer was never really put to work. Nothing in a fly box comes close to offering the diversity and deadliness of a well-presented streamer. Whether on a Montana spring creek, an Amazon blackwater lagoon, or the chalky flats of a Caribbean reef, a streamer can deceive the wariest (and largest) of fish.


Many people don't use streamers because of the mistaken belief that streamers target only the largest fish and preclude the possibility of catching a lot of "regular" fish. While it is true that streamers consistently account for many truly huge fish, small fish will take incredibly large streamers. I'm always amazed as I watch three-inch trout in my aquarium routinely attack, kill, and eat one-inch guppies. Translated into angling terms, this means a 12-inch fish can (and will) take a four-inch streamer.


What is a streamer? I'm not sure. Several years ago while tossing a size 12 Bird's Nest nymph pattern to fish feasting on Siphlonurus nymphs, I observed a nice trout surging through the weedy shallows in obvious pursuit of baitfish. I cast the nymph its way and after a few strips was fast to a 17-inch brown. During release, the trout coughed up two speckled dace fry. The Bird's Nest was a perfect imitation and in the course of a single cast had been transformed from a nymph to a streamer.

Woolly Buggers are streamers; however, I've used them to imitate dragonfly nymphs at Crane Prairie Reservoir, crayfish on the Walker River, and lamprey eels on Pacific coastal streams. If it looks like a streamer, acts like a streamer, and catches lots of fish, it's a streamer.

Streamer Design

Open any fly-fishing catalog and prepare to be overwhelmed by the sheer numbers and types of streamers; there's one for every conceivable purpose and even a few for which I can't figure a purpose. From the intricately detailed Widowmaker to the satisfying mess called a marabou leech, streamers run the gamut of extreme realism to ultimate impressionism.

Four fly fishing streamers laid out over a teal background
The author's favorite patterns include (clockwise from upper left) the Woolly Bugger, Marabou Leech, Goblin, and Bunny. (Ralph Cutter photo)

In the desire to express one's artistic ability, or perhaps on the off chance that it will be purchased by a wide-eyed angler, many streamer designs have been developed that are detrimental to the effective pursuit of fish; sculpin imitations with heads of deer hair are a good example.




I've spent many dozens of hours in scuba gear observing the antics of sculpins in their natural environment. I've had pet sculpins that would eat earthworms from my fingers and would nearly leap out of the aquarium for a tadpole. Through this long-term relationship, I've concluded that sculpins are not open-water fish and that after the first few weeks of drift, they spend their entire lives within several inches of the streambed. Deer hair floats like a cork and thus is counterproductive on a streamer meant to imitate a bottom dweller.

Woolhead sculpins were developed to provide the bulky silhouette of a sculpin's head and pectoral fins without the liability of being buoyant. The problem with woolheads is that they soak a lot of water and become heavy to cast. The best sculpin heads are made by simply turning a few winds of soft saddle hackle around the head of the fly; the illusion of bulk is provided without the attendant problems of deer hair or wool.

Are bulky heads even necessary? Absolutely not. Sagehen Creek in the Truckee River drainage has a population of sculpins reaching densities as great as six adults per square meter. The trout in Sagehen are highly keyed to sculpins but time and again refuse realistic sculpin patterns in favor of impressionistic Woolly Buggers and Zonkers. I've pressured some of those trout severely, fishing streamers past them several times a day for days on end. Those fish became acutely selective to presentation, but never did they shift pattern selectivity to that of a realistic tie.

Recommended


Fly color has long been open to debate; the old adage "Bright flies for bright days, dull flies for dull days" contains a lot of merit. When you are dredging deep, dark water or fishing during low-light periods, nothing can compare with a black streamer for visibility. A small amount of flash created by a few strands of Crystal Hair or Flashabou often works wonders, perking the attention of indifferent trout. Gobs of brightly reflective material will catch fish, sometimes in impressive fashion; however, Silver Sparklers and the like usually put trout down.

Main image of a brightly colored and heavily spotted rainbow trout being held in two hands; inset image of a purple Bunny streamer with weed guards displayed on a teal background
Main image: A predatory Alaskan rainbow trout. Inset: A purple Bunny with a guitar-string weed guard avoids snags when you fish it along the stream bottom. (Ralph Cutter photos)

In discolored water, patterns with highly contrasting materials are often significantly more productive than mono-hued imitations; for instance, a Goblin (basically a dark olive Woolly Bugger with a bright orange hair strip pulled over the back, Zonker-style) is consistently a top producer during periods of runoff, but it fails miserably when the water clears.

It is normal to find weighted streamers, but heavily weighted streamers look dead underwater. They clunk amidst the rocks, drop like a stone between strips, and snag incessantly. Heavily weighted streamers are invariably hard, and I'm positive that many fish are lost (or never detected) when they mouth and immediately reject a hard fly. Though streamers are usually best fished right on bottom, there are situations when the streamer is most effectively worked just under the surface, through shallow riffles, and in and around weedbeds and snags. A weighted streamer is a liability in these situations. The most versatile streamers are tied without weight so split-shot can be added or taken away as the situation dictates.

Where snagging is a real problem, a long tag end can be left on a Duncan knot and the split-shot squished onto that. The lead will strip off in the event of a snag and save the fly. When using two streamers in tandem, I weight the point streamer and make sure its tippet is considerably lighter than the dropper's. If the point streamer snags, it will break off; thus saving the dropper (a sacrifice fly).

You can reduce snagging by using weedless streamers. Keeled flies (imitations where the hook rides upside-down) offer snag protection but are unacceptable because of their propensity to hook fish through the eye or brain. Monofilament loops work well only if the mono extends directly over the point of the hook. The best weed guards can be easily made by folding a piece of .009" guitar string in half then tying the ends of the wire near the eye of the hook so the folded segment of guitar string just envelopes the hook point. For 90 cents you can buy a lifetime supply of guitar string (to make it black, sim­ ply dip the wire in a bottle of instant gun blueing).

In a nutshell, a general-use streamer should be dark, lightly weighted (if at all), and impressionistic. The less it resembles a specific food form and the more it counterfeits "life" in general, the better.

Woolly Buggers, marabou leeches, and Bunnies run far ahead of the pack followed by Zonkers and Matukas. Nothing else comes close.

Streamer Presentation: Ways to Work the Bottom

While working in Alaska, I watched my guide partner, Brad Estelle, tie a soggy Skoal Bandit to his leader and proceed to entice a large rainbow to chase down his "streamer." In the hands of a skilled angler, even a marginal pattern can be turned into a living thing that trout want to eat.

A good streamer with lots of built-in life takes even the novice angler a giant step toward hooking fish. The following techniques are described in a pure form, but these techniques are usually used in combination.

1. Dragfree Drift. As the name implies, this is a presentation in which you avoid adding action to the fly but do everything you can to prevent drag from disrupting a dead­drift. Except for exceptionally fast and deep water, a floating line with an eight- to ten-foot leader works well. Floating line is easy to control, and the monofilament leader isn't nearly as vulnerable to drag as are weighted lines.

To get a dragfree drift, position yourself directly across­stream from the target. Cast well upstream to allow the streamer to sink to the desired level. Keep as much line off the water as possible by raising the rod tip and stripping in line as the streamer drifts toward you. If needed, mend the line that remains on the water to avoid drag. As the fly pass­ es you and drifts downstream, lower the rod tip and feed line to the drift. Make several passes through the lie with an unweighted streamer, then add enough split-shot to get the fly to scrape bottom.

This technique is particularly effective where a riffle drops into a pool or at the discharge of a spillway or penstock. My guess is that fish associate the drifting streamer with a life form that was stunned or killed by the turbulent waters.

2. Klamath Swing. This technique is the easiest to perfect but has never produced like the drag-free drift or the downstream retrieve. The Klamath Swing can be accom­ plished with either a floating or sinking line. Because the strikes are on a taut line, a heavy tippet is a must.

Cast quartering down and across-stream; the more you cast directly across the stream (rather than down), the deep­ er the streamer will drift. A reach cast is great in this situa­tion, but a quick mend toward the far shore should give the streamer a chance to sink a bit before it begins to swing.

As the current picks up your fly line, the streamer will ferry across-stream and end up directly downstream of the rod tip. Strikes usually occur at the start of the swing or just at the end as the fly begins to slow.

Allow the fly to hang in the current for a few seconds and strike on even the most subtle bump. (I've seen trout completely inhale then reject even fast-moving streamers with­ out telegraphing their presence to the angler.) At this point you may wish to sling the fly into another drift by using a water haul, or you might want to swim the streamer for a while. I usually elect to play games with any suspected fish before beginning a new drift.

As you play with the streamer, keep in mind that any fly will always come to rest directly below the rod tip. By simply switching an extended rod from one hand to the other, you can easily swim the streamer back and across 20 feet of river. By mending toward stronger current, you can speed up the streamer; mending into the slower current causes the fly to slow down and sink deeper. Make your streamer come alive by altering the speed of its "swim," by twitching the streamer a few feet upstream then letting it drift back down, or by pulsing the fly by bobbing the rod tip.

3. The Downstream Retrieve. This is a killer technique that effectively mimics the true behavior of a wounded or fleeing bait­ fish (see Figure 1). Just about every animal I can think of will take the path of least resistance when being pursued (chukar defy logic).

Illustration of a fly angler using a downstream streamer retrieve
Figure 1: The Downstream Retrieve. (Rod Walinchus illustration)

Deer run downhill; doves fly downwind; and fish swim downstream. Almost all streamer anglers violate this behavior by stripping their imitations upstream.

Where possible, simply cast upstream and strip the streamer back to you. If you own an old worthless rod, try setting it up with a sinking shooting-taper, then take it and a handful of streamers to a place where the water is deep, dark, slow, and cold­ lunker country. Wade into the river as deep as you dare, launch the fly upstream, then bury the rod in the water so that the rod tip is just off the river bottom. Strip the fly toward you; the only place it can swim is directly along the river bottom. Simply deadly. Have fun trying to lift the rod out of the water with a large trout tugging your line.

4. The Big Bend. It's the finest method I know of for fishing an undercut bank (see Figure 2). Position your­ self so that you're facing the undercut bank, beaver lodge, or overhanging alders. Then:

  1. Cast the streamer far upstream so that it lands as close to the bank as possible.
  2. Mend the line so that it lays parallel with and as close to the bank as possible.
  3. Point the rod tip back upstream toward the fly (feed slack line through the guides so that the pointing motion doesn't ruin your nice mend).
  4. With the rod tip at water level, strip like crazy. The fly will dart downstream, right along the undercut, just begging to be slammed by any trout lurking in the cover.
Illustration of a fly angler using streamers against an undercut bank, with mending and current shown
Figure 2: The Big Bend. (Rod Walinchus illustration)

By putting streamers to work, you will tag much larger trout than ever before. It will be tempting to make wall hangers from these guys.

Please don't.


Ralph Cutter is a freelance writer from Truckee, California.

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Recommended Articles

Recent Videos

Fly Fisherman Magazine Covers Print and Tablet Versions

GET THE MAGAZINE Subscribe & Save

Digital Now Included!

SUBSCRIBE NOW

Give a Gift   |   Subscriber Services

PREVIEW THIS MONTH'S ISSUE

Buy Digital Single Issues

Magazine App Logo

Don't miss an issue.
Buy single digital issue for your phone or tablet.

Buy Single Digital Issue on the Fly Fisherman App

Other Magazines

See All Other Magazines

Special Interest Magazines

See All Special Interest Magazines

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Get the top Fly Fisherman stories delivered right to your inbox.

Phone Icon

Get Digital Access.

All Fly Fisherman subscribers now have digital access to their magazine content. This means you have the option to read your magazine on most popular phones and tablets.

To get started, click the link below to visit mymagnow.com and learn how to access your digital magazine.

Get Digital Access

Not a Subscriber?
Subscribe Now

Enjoying What You're Reading?

Get a Full Year
of Guns & Ammo
& Digital Access.

Offer only for new subscribers.

Subscribe Now